| Enertia Plus Motor | |
|---|---|
| Motor Type: | High output sealed brushless permanent magnet AC |
| Peak Motor Power: | 13kW @ 4500 rpm |
| Peak Continuous Current: | 80 A |
| Max Motor Torque: | 40 N-m, 29.5 ft-lb @ 0 - 1450 rpm |
| Enertia Plus Batteries | |
| Battery Type: | Brammo Power™ Lithium-Ion NCM |
| Battery Pack Capacity: | 6.2 kWh (nominal) |
| Battery Pack Voltage: | 88.8 V (nominal) |
| Recharge Time: | Approximately 7.5 hours from 0% SOC |
| Battery Life: | 1,500 cycles to 80% capacity |
| Enertia Plus Performance | |
| Top Speed: | 60+ MPH, 95+ KPH |
| Average Range: | 80 miles / 128 km (MIC City Driving Range Test Procedure) Electric vehicle range is affected by a number of factors including; speed, acceleration, number of starts and stops, rider and cargo weight, changes in elevation, headwinds and road surface..
|
| Enertia Plus Dimensions | |
| Weight: | 330 lbs / 150 kg |
| Cargo Capacity: | 276 lbs / 125 Kg (600 lbs / 272 Kg total combined rider, cargo and motorcycle) |
| Seat Height: | 32.0" / 81 cm |
| Length: | 81.5" / 207 cm |
| Width: | 12.5" / 37.75 cm (body) 19.5" / 49.5 cm (peg to peg) 33.0" / 84 cm (handlebar tip to tip) |
| Enertia Plus Key Components | |
| Frame: | Lightweight extruded and welded aluminum - serves as a battery tray (patent pending) |
| Suspension - Front: | Marzocchi Shiver hydraulic USD with compression damping adjustment. 5.0" / 12.75 cm of suspension travel. |
| Suspension - Rear: | Works Performance hydraulic with pre-load and rebound damping adjustment. 5.0" / 12.75 cm of suspension travel. |
| Brakes - Front/Rear: | Brembo hydraulic |
| Wheels - Front: | 18" x 2.5" / 45.75 cm x 6.5 cm Cast Aluminum |
| Wheels - Rear: | 17" x 3.5" / 43 cm x 9 cm Cast Aluminum |
| Enertia Plus Options & Accessories | |
| Premium Seat: | Textured black vinyl and charcoal gray synthetic suede combination with accent stitching. Durable UV and water resistant with added top of seat comfort. |
| Saddle Bags: | Soft shell expandable panniers -OR- rigid Givi lockable storage bags on powdercoated steel frame. |
|
|
The Enertia Plus uses Brammo's proprietary lithium-ion battery technology, Brammo Power®. The Vehicle Control Unit (VCU) monitors all aspects of the battery's performance and maintains consistent balance, performance, and health of this valuable component over the life of the motorcycle. The Enertia Plus features an 850 Watt on-board battery charger, which can charge using any standard 110-120 Volt / 15A electrical outlet (standard US household) or equivalent European household outlet. The charging cord is stored conveniently underneath the lockable seat to allow for ease of charging making almost any power outlet your personal "charging station".
Electric vehicle range is affected by a number of factors including; speed, acceleration, number of starts and stops, rider and cargo weight, changes in elevation, head winds and road surface.