 Emphasizing the attributes that expose the joy of motorcycling, the Enertia eliminates features and characteristics that can cause intimidation and complexity in traditional motorcycles. Celebrating the spirit, fun and approachability of the simple, lightweight motorcycle, which has a magical place in transportation history, was a primary design goal for the Enertia. A blend of old school purist themes and new school technology, the Enertia strikes a perfect balance between the familiar and the future of motorcycling. |
|
    Your Enertia's range depends on your riding habits, route, weight, and weather. To help you estimate your actual range, use the chart above. |
| Enertia Motor | |
|---|---|
| Motor Type: | High output sealed brushless permanent magnet AC |
| Peak Motor Power: | 13kW @ 4500 rpm |
| Peak Continuous Current: | 80 A |
| Max Motor Torque: | 40 N-m, 29.5 ft-lb @ 0 - 1450 rpm |
| Enertia Batteries | |
| Battery Type: | Valence Brand - Lithium Iron Phosphate* |
| Battery Pack Capacity: | 3.1 kWh |
| Battery Pack Voltage: | 76.8 V (nominal) |
| Recharge Time: | Approximately 4 hours |
| Battery Life: | 2,000 recharges |
| Enertia Performance | |
| Top Speed: | 60+ MPH, 95+ KPH |
| Average Range: | 42 miles / 68 kilometers Actual results will vary. Like all electric vehicles, range is affected by a number of factors including but not limited to: speed, acceleration, number of starts and stops, changes in elevation.
|
| Enertia Dimensions | |
| Weight: | 324 lbs / 145 Kg |
| Cargo Capacity: | 276 lbs / 125 Kg (600 lbs / 272 Kg total combined rider and cargo) |
| Seat Height: | Standard seat 32.0" / 81 cm Optional Premium Seat 32.0" / 81 cm |
| Length: | 81.5" / 207 cm |
| Width: | 12.5" / 37.75 cm (body) 19.5" / 49.5 cm (peg to peg) 33.0" / 84 cm (handlebar tip to tip) |
| Enertia Key Components | |
| Frame: | Lightweight extruded and welded aluminum - serves a battery tray (patent pending) |
| Suspension - Front: | Marzocchi Shiver hydraulic USD with compression damping adjustment. 5.0" / 12.75 cm of suspension travel. |
| Suspension - Rear: | Elka hydraulic with compression damping adjustment. 5.0" / 12.75 cm of suspension travel. |
| Brakes - Front/Rear: | Brembo hydraulic |
| Wheels - Front: | 18" x 2.5" / 45.75 cm x 6.5 cm Cast Aluminum |
| Wheels - Rear: | 17" x 3.5" / 43 cm x 9 cm Cast Aluminum |
| Enertia Options & Accessories | |
| Premium Seat: | Textured black vinyl and charcoal gray synthetic suede combination with accent stitching. Durable UV and water resistant with added top of seat comfort. |
| Saddle Bags: | Semi-soft side, heavy-duty construction. Includes bolt-on mounting frame. 14.5" / 39 cm Length, 10" / 25.5 cm Height, 6" / 15.25 cm Depth (expands to 8" / 20.25 cm depth) |
|
|
*The batteries we use in the Enertia have an amazing life cycle and are maintenance free. They're inherently extremely safe and can withstand temperatures without decomposing and, unlike other batteries, can be topped up at any time.
The Enertia uses six batteries and the on-board computer ensures that they maintain an equal charge. This prevents total battery depletion and maximizes energy storage on the powercycle. For your convenience and ease of charging we have built a charger into the Enertia powercycle. The on-board battery charger can charge using any standard 10 amp 115 volt electrical outlet and the Enertia powercycle is estimated to only need 13 charges per month based on average commuter data.
This means you can charge the Enertia powercycle anytime: at home, work, anywhere there is a socket. You will save time, money on maintenance, and you will never have to worry about forgetting the charger because it's always on board.
|
The BRAMMO Enertia produces no emissions, operates in virtual silence (think smooth, steady whir, slightly muted by wind noise as your speed of travel increases) and never requires a stop at a gas station because it is 100% electric. Riding an Enertia won't save the planet but if everybody in the world rode a powercycle it would make a nice difference. BRAMMO made extensive use of recycled materials in the design of the Enertia. Fenders are made from 100% recycled plastic materials. Body panels are from 25% recycled materials and the extruded aluminum frame (patent pending, btw) is constructed from recycled aluminum as well. Even the base of the seat is made of 100% recycled material. In fact, not only does the Enertia use recycled materials in its construction, the powercycle itself can be recycled at the end of its primary life. BRAMMO is committed to designing and building products with sustainability in mind. This commitment also extends to our employees, who are encouraged to make lifestyle decisions to help reduce their own carbon footprint and impact on the environment. BRAMMO encourages commuting by bicycle into work by offering employees incentives and allowing them to keep their bikes in the office. BRAMMO also purchases offsets for the energy it uses in its Enertia assembly facility and design offices. Be part of the solution.  |
  
|